Skip to content

ELEGOO Centauri Carbon 2 3D Printer

by ELEGOO
SKU DGT0485973

Избери период за изплащане и виж месечната вноска

Месечна вноска Обща сума за плащане ГПР Лихва Банка

Description

ELEGOO Centauri Carbon 2 3D printer

The ELEGOO Centauri Carbon 2 3D printer is an FDM model with an enclosed body, based on CoreXY construction, designed for high-speed printing with a wide range of filaments. It offers a build volume of 256 × 256 × 256 mm, printing speeds of up to 500 mm/s, a standard acceleration of 10 000 mm/s² and a maximum acceleration of 20 000 mm/s², as well as a nozzle that reaches a temperature of 350°C. Automatic calibration, the enclosed chamber, the Dual-Gear Direct extruder, the camera and a set of sensors make it easier to set up the printer and help monitor the printing process. Centauri Carbon 2 is also ready for multicolour printing via the CANVAS system, which is sold separately.

Print head with extruder and visible interior in the Elegoo Centauri Carbon 3D printer

CoreXY – speeds up to 500 mm/s

The CoreXY construction allows the printer to reach speeds of up to 500 mm/s, while the manufacturer's recommended speed is 250 mm/s. The standard acceleration is 10 000 mm/s² and, when needed, the maximum value can reach 20 000 mm/s², which helps reduce project completion time. Two 4260 stepper motors drive the X and Y axes independently, and the metal low-friction linear rails ensure smooth movement of the mechanism. The integrated frame and cast aluminium base minimise vibrations during high-speed operation, ensuring stability and print accuracy of ±0,1 mm.

Close-up of the rubber anti-vibration feet on the Elegoo Centauri Carbon 3D printer’s housing

Stable guidance along the Z axis

The Z-axis construction includes 3 trapezoidal screws and 3 metal linear rails, which provide stable guidance of the print platform. The three-point support of the mechanism helps maintain the correct position of the platform through successive printing stages, which is especially important for taller models. Combined with a sturdy aluminium frame, this solution provides a stable foundation for the high-speed CoreXY system and helps ensure layer-by-layer repeatability.

Build plate with PEI sheet on the Elegoo Centauri Carbon 3D printer, showing the four sensors

350°C nozzle and a wide choice of materials

A nozzle capable of reaching temperatures up to 350°C, together with the enclosed chamber, allows the use not only of basic filaments but also of more demanding ones. Centauri Carbon 2 supports 1,75 mm filament diameter and can print, among others, with PLA, PETG, TPU, PLA-CF, ABS, ABS-CF, ASA, ASA-CF, PET, PET-CF, PETG-CF, PC and PA, as well as with selected PPS and PPA filaments. It features a 0,4 mm nozzle made of brass and hardened steel, a titanium heatsink and a print platform that can reach temperatures up to 110°C. This configuration provides greater flexibility in matching the material to the properties of the part being printed.

The front glass door and black housing of the Elegoo Centauri Carbon 3D printer

Automatic calibration and print control

Centauri Carbon 2 offers full automatic calibration and automatic levelling with measurements at 121 points, so preparing the printer for printing requires fewer manual adjustments. The built-in camera allows monitoring of the printing process, while the filament runout sensor and clog detection help quickly identify problems that could interrupt the project. The printer also features automatic filament retraction, fan control and the ability to resume printing after a power outage. As a result, many tasks related to process monitoring are performed automatically by the device.

Close-up of the drive timing belt and guide mechanism in the Elegoo Centauri Carbon 3D printer

Build volume: 256 × 256 × 256 mm

The build volume of 256 × 256 × 256 mm allows printing of both larger models and several smaller parts in a single print cycle. The printer uses a double-sided spring steel plate with a textured PEI surface and a surface specially designed for PLA, which allows choosing the appropriate side for the material used. The available layer height is from 0,1 to 0,4 mm, with the recommended setting being 0,2 mm. This allows the user to adjust the parameters according to the desired level of detail and print time.

Cross-section of the activated carbon air filter for the Elegoo Centauri Carbon 3D printer

Ready for multicolour printing and easy to use

ELEGOO Centauri Carbon 2 is ready for multicolour printing via the compatible CANVAS system, which must be purchased separately. It has a capacitive touchscreen, while the USB and Wi-Fi connection offers convenient options for transferring prepared projects. The printer is compatible with ElegooSlicer, Orca and Cura and supports STL, OBJ, 3MF and STEP file formats. Quiet motor control on all axes keeps noise levels below 45 dB, and the printer is equipped with LED lighting and a HEPA filter with an activated carbon layer.

Touchscreen of the Elegoo Centauri Carbon 3D printer showing the control interface and temperature

Included in the box

  • ELEGOO Centauri Carbon 2 3D printer
  • Touchscreen
  • Filament spool holder
  • Filament spool holder mount
  • Power cable
  • Nozzle cleaning needle
  • Hex keys
  • Screwdriver
  • Filament sample
  • Spare element for cleaning the heated nozzle
  • User manual
  • USB flash drive
  • Scraper
  • Cable for the filament runout sensor

 

Manufacturer ELEGOO
Model Centauri Carbon 2
Printing technology FDM (Fused Deposition Modeling)
Construction CoreXY
Build volume 256 × 256 × 256 mm
Print platform size 260 × 260 mm
Maximum print speed up to 500 mm/s
Recommended print speed 250 mm/s
Standard acceleration 10 000 mm/s²
Maximum acceleration 20 000 mm/s²
Print accuracy ±0,1 mm
Layer height 0,1–0,4 mm
Recommended layer height 0,2 mm
Filament diameter 1,75 mm
Supported filaments PLA, PETG, TPU, PLA-CF, ABS, ABS-CF, ASA, ASA-CF, PET, PET-CF, PETG-CF, PC, PA and selected PPS and PPA materials
Extruder Dual-gear direct-drive extruder
Nozzle Brass + hardened steel
Nozzle diameter 0.4 mm
Maximum nozzle temperature 350°C
Maximum bed temperature 110°C at ambient temperature 25°C
Operating ambient temperature 5–40°C
Thermal protection Titanium alloy
Build platform Double-sided spring steel plate, textured PEI surface, PLA compatible
Levelling automatic, 121-point
Drive control Silent controllers for all axes
Camera Yes
Full automatic calibration Yes
Filament runout sensor Yes
Air filter HEPA + activated carbon
LED lighting Yes
Display 5" capacitive touchscreen
Operating system ELEGOO OS
Connectivity USB, Wi-Fi
Software ElegooSlicer, Orca, Cura
Supported input formats STL, OBJ, 3MF, STEP
Output format G-code
Multicolour printing support Can be upgraded with CANVAS (sold separately)
Operating noise level ≤45 dB
Printer dimensions 398 × 404 × 490 mm
Net weight 17.5 kg
Input voltage 100–240 V AC, 50/60 Hz
Output voltage 24 V
Rated power 1,100 W at 220 V / 350 W at 110 V

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare