Description
STATIONARY CHARGING STATION WITH RICH FUNCTIONALITY EVPoint EV22 is a new generation charging station that allows fast and safe AC charging with a power of up to 22 kW. The device is a perfect solution for charging in home and public environments by connecting a Type 2 cable for European cars or a Type 1 adapter for American ones. The successful use of the charging station precisely in public environments makes the station produced in Bulgaria among the most sought-after chargers for hotels, office buildings, parking lots, shopping centers, and car showrooms. This is not the typical charging station. Adding electrical energy to the vehicle's battery charge is the main task of any station. With software development, however, more and more convenient features are being added to the chargers, which facilitates daily charging and proper monitoring of all processes. EV22 is just such a device - modern. Thanks to internet connection capabilities (3G, 4G, Wi-Fi and Ethernet), the station allows remote control and real-time monitoring from the comfort of the EVPoint mobile app. The internet connection also allows the remote receipt of updates that improve the device's operation, as well as an online check in case of a problem or failure. The station itself has its own web interface for setup, monitoring, and diagnostics. Through the supported OCPP 1.6 protocol, the station can be connected to any platform that works with the same protocol. This is especially important when using the station for public use. Operator platforms, such as that of evpoint.bg, provide the opportunity to access and manage your stations, as well as bill for charging sessions from customers. Choice of charging speed The degree of charging can also be controlled. The three-phase charging station can charge at an amperage specified by you up to 32A - 22 kW. Given the massively used single-phase onboard chargers in electric vehicles on the market at the moment, EV22 appears as one of the best-optimized chargers from the point of view of functionality and charging capabilities. When installed at a public location where other smart stations are also installed, EVPoint EV22 can monitor the instantaneous consumption and regulate the charging powers of all devices to avoid overloading the network, while at the same time not interrupting the process. This feature is known as Dynamic Load Management. Electric Vehicle 3.7 kW 7.4 kW 11 kW 22 kW HYUNDAI IONIQ ELECTRIC (28 kWh) 7.5 hours 4 hours 4 hours 4 hours HYUNDAI IONIQ 5 (72.6 kWh) 20 hours 10 hours 6.5 hours 6.5 hours PEUGEOT E-208 (47.5 kWh) 13 hours 6.5 hours 4.5 hours 4.5 hours RENAULT ZOE (41 kWh) 11 hours 5.5 hours 4 hours 1.5 hours BMW I3 (37.9 kWh) 12 hours 6 hours 4 hours 4 hours SKODA ENYAQ IV (58 kWh) 18.5 hours 9 hours 6 hours 6 hours Mercedes EQE 350+ (90.6 kWh) 29 hours 14.5 hours 9.5 hours 5 hours BMW iX M60 (105.2 kWh) 33.5 hours 16.5 hours 11 hours 11 hours Real-time charging monitoring A convenient feature of the EVPoint mobile application in combination with the charging station is the ability to remotely monitor charging sessions in real-time. In this way, you can see the instantaneous power, change pre-set parameters, or stop charging if necessary. Charging history Every charging session started through the app is recorded and stored in your charging history. From this section, you can generate statistics for a specific period and analyze the electricity consumption used for the vehicle from your home. Manufacturer: EVPoint Model: EV22 PLUS MY24 Tethered Maximum power: 22.1 kW (three-phase), 32 amperes Self-consumption in stand-by mode: < 8 VA, 5.2 W Rated voltage: 230 V AC (single-phase connection); 400 V AC (three-phase connection) Connection to the electric vehicle: Type 2 IEC 62196-2 cable (optionally with socket), standard length 5 metres; optionally 7.5 metres and 10 metres Number of phases: three-phase, 3 x 32A (22.1 kW) / The charging station can be connected both three-phase and single-phase. With three-phase connection it allows charging up to 22.1 kW (32 A on each phase), and with single-phase up to 7.4 kW (32 A on the first phase L1). Communication protocol: OCPP 1.6J Communication modules: WLAN: 802.11 b/g/n/e/i (2.4GHz); Bluetooth: BT4.2 (serves only for station configuration); Ethernet (LAN) via RJ45 port (10/100 Mbps); 4G/ LTE Authorisation method: via the EVPoint mobile application, RFID card, Plug & Charge Box material: Plastic Degree of protection: IP54 protection against environmental influences; IK08 Residual current protection: built-in type B, RCD DC < 6 mA and AC < 30 mA; earth conductor check; +- 207v - 253v check Energy meter: Built-in energy meter Mounting: On wall or on pedestal Operating temperature: -25 °C to +55 °C Colour: matt black Dimensions: 363 (H) x 200 (W) x 129 (D) mm Warranty: 60 months: 24 months (standard) + 36 months (* extended warranty) Weight: 3.6 kg. Origin: Bulgaria
