CERESIT TILE ADHESIVE CM 25 WHITE

DESCRIPTION

CERESIT® CM 25 is particularly recommended for laying glass mosaics or tiles where a uniform base color is required,
and also for discoloration-resistant bonding of light and translucent marble and other natural stone slabs using the thin-layer method.
CM 25 is suitable for laying various tiles (ceramic, stoneware, natural stone) and porcelain tiles on sensitive substrates.
Exceptional adhesive strength
For large format plates (100x100 cm)
For pool lining
with glass ceramic
For critical and deformable foundations
Low cost rate

PREPARATION OF THE BASE FOR LAYING CERESIT CM 25

Before applying CM 25, clean the surface from dust, dirt and other substances that reduce adhesion.
Remove loose mechanical particles.
Uneven areas or depressions must be leveled beforehand, for which purpose CD 24 or CD 26 can be used.

MIXING CERESIT CM 25

Pour the contents of the package into the measured amount of clean, lukewarm water and mix with a mixer until a homogeneous mass without lumps is obtained.
You need to wait 5 minutes (maturing time) and then stir again.

APPLICATION OF CERESIT CM 25

The adhesive is applied with a suitable notched trowel depending on the size of the tiles.
For interior use - the back of the tile (contact area) must be at least 65% coated with adhesive.
For external use, a minimum adhesive coverage of 90% is required (a combined application method must be used,
i.e. additionally apply a thin layer of adhesive to the back of the tile).
CM 25 is fast-curing - note the shortened skin formation and pot life compared to normal-curing tile adhesive.