Hand circular saw Premium - 31330, 1300W, Ø185 mm, with laser

Hand circular saw Premium - 31330 Place it on the workpiece so that only its front edge rests on the worktop, with the saw blade behind the material at a distance of 30 - 40 mm. When working with a hand circular saw, the workpiece must be firmly secured on supports at a height of 600 – 700 mm from the floor and clamped with clamps. The cutting line must be outside the support. Hold the hand circular saw with both hands, with the right hand gripping its handle so that the index finger is on the electrical switch lever, and the left hand gripping the auxiliary handle at the front of the worktop.

The floor must be clean; avoid working in places where the floor is slippery due to sawdust or wax. Your power tool will work much better if you do not apply excessive force when using it. Always wear safety goggles. Use a face mask or dust mask if dust and noise will be generated during work. Always clamp the workpiece with a clamp or vise, so that you can use both hands to guide the machine.

Technical data:

• Power: 1300 W;
• No-load speed: 4500 rpm;
• Disc diameter: 185 mm;
• Cutting depth: at 90° - 65 mm;
• Laser guide.