More time for the nice things in life: the intelligent RCV 3 cleaning robot takes over the cleaning of your floors. Once started, the RCV 3 robot systematically and independently cleans your hard floors and low-pile carpets. Dry dirt is reliably collected in the integrated waste container by the rotating brush and the side edge brush. Where necessary, the RCV 3 not only vacuums, but can also wet the mop. As the battery capacity decreases, the RCV 3 can be charged regularly and always returns to the charging station after the job is done. Via the app, the RCV 3 is sent on an exploration tour and will automatically create a map of the rooms using the detection of the surroundings (LiDAR). Individual cleaning parameters can be set for each room. For example, which rooms should be vacuumed, mopped or not cleaned. Additional sensors prevent the device from falling, for example on stairs. For cleaning tasks, the RCV 3 can be conveniently started via the app, using a pre-set individual schedule or by pressing a button on the device. If the cleaning robot needs help, in many situations it will tell you via voice message.
Data protection and updates
- As a manufacturer based in Germany, Kärcher attaches great importance to data protection and takes extreme care to ensure compliance with all applicable legal requirements in this regard.
Voice command
- Always well informed: RCV 3 uses voice commands to provide important information and share current status.
- If the RCV 3 robotic vacuum cleaner needs help or service, in many situations it will notify you via voice message.
Conveniently controlled via the app via WiFi
- The app can be used to adapt many of the settings to individual preferences.
- Using the app, you can configure the RCV 3 cleaning robot and control it from anywhere. Even when you're not at home.
- Information about the current status of the device and a display showing the current cleaning progress are available through the app.
Precise mapping with many customization options
- The application can store multiple maps, e.g. for different floors.
- It is possible to define areas where you do not want the robot to go and clean (e.g. cat scratching posts, play areas in children's rooms or obstacles that the robot cannot avoid).
- Identify selected areas that need to be cleaned multiple times, cleaned in intensive cleaning mode, or wiped with more water.
Adjusting cleaning parameters
- Defining different cleaning parameters in the app for individual room areas (e.g. suction power or water volume, number of cleanings per surface).
Timer program
- You can schedule cleaning times and create cleaning plans through the app.
- RCV 3 automatically starts cleaning based on scheduled dates/times.
Technical data
- Article number: 1.269-620.0
- Battery-powered device
- Battery charging time (min) 230
- Battery type Lithium-ion rechargeable batteries
- Battery capacity (Ah) 3.2
- Cleaning duration per charge (min) 120
- Efficiency per unit area (depending on cleaning mode) (m²/h) 85
- Waste container (ml) 500
- 2 in 1 waste container (ml) 300
- 2 in 1 clean water tank (ml) 170
- Suction power (Pa) 2500
- Sound power level (dB(A)) 67
- Current type, charging station (~/V/Hz) 1 / 100 - 240 / 50 - 60
- Robotic vacuum cleaner weight (incl. cleaning module and cleaning cloth) (kg) 3.7
- Charging station weight (kg) 0.6
- Weight incl. Packaging (kg) 6.946
- RoboCleaner Dimensions (L x H) (mm) 350 x 94
- Charging station dimensions (L x W x H) (mm) 80 x 150 x 102
Scope of delivery
- Cleaning brush
- Side brush: 2 x
- Filter: 2 x
- Cleaning tool
- Wiping device
- Microfiber cloth: 2 x
- 2-in-1 waste container including clean water tank
- Waste container
- Charging station
Equipment
- Autonomous cleaning
- Anti-fall sensors
- Management via App (phone application)
- WLAN
- Voice command
- Laser navigation system (LiDAR)
- Timer program: possibility of different operating settings
- Different modes: Dry cleaning, Wet cleaning, Combined cleaning (wet and dry), Automatic system, Spot
Warranty: 24 months
