POLISH FOR WOODEN FLOORS GLOSS 2.5 L.

Single-component water-based clear varnish for wooden floors, transparent, based on polyurethane resin. Suitable for application on parquet, flooring and stairs made of new or old wood, in interior spaces. It spreads excellently, is odourless, does not yellow and dries quickly. It is easy to apply, provides a smooth surface, high hardness and high resistance to abrasion and scratching, and is resistant to water and cleaning agents.

• Surface drying time 1-2h
• Dilution percentage with water 5%
• Consumption 10-12m2/lt
• Application by brush, roller, spray gun

COLOURS:
Colourless. Available in glossy and satin finish variants.

SURFACE PREPARATION:
Surfaces must be dry and clean, free of dust, resin and grease, and old floor surfaces must be well sanded.
First apply two coats of water-based primer for floor coverings, then lightly sand the surface with fine sandpaper.

APPLICATION:
Before use, the product must be stirred thoroughly. Apply in two coats with a roller or brush, diluted by adding 5% water. The product must not be applied at temperatures below 5°C, above 35°C and/or at relative humidity above 80%.
The applied layer is dry to the touch after 1–2 hours. The next coat is applied after 6–8 hours, and the surface must be sanded beforehand. The given times vary depending on atmospheric conditions (relative humidity and temperature).
Tools are cleaned immediately after use with water and, if necessary, washed with soap or detergent.