Skip to content

SINK 60/80 POLYMER MARBLE 219

by FAT
SKU DGT0496186

Избери период за изплащане и виж месечната вноска

Месечна вноска Обща сума за плащане ГПР Лихва Банка

Description

Kitchen sink made of polymer marble, with high resistance to prolonged exposure to sunlight. Coating with high resistance to aggressive household chemical cleaners. High level of antibacterial protection of the coating, thanks to silver ion technology.

• Pre-marked technological holes for a mixer tap and/or liquid soap dispenser, with options for individual drilling at the customer's choice.

• Rich variety of colours: see here

• The technology works by adding silver ions. Once applied, they provide constantly active antibacterial protection, and the level of bacteria on the surface decreases by up to 99% within two hours and by up to 80% within the first 15 minutes.

Dimensions:

Width of the bowl: 51 cm.
Length of the bowl: 36 cm.
Length of the sink: 60 cm.
Depth of the bowl: 21 cm.
Width of the sink: 80 cm.

Package contents:

• Italian Ø90 mm siphon with overflow and option to additionally connect a washing/dishwasher machine.
• Paper template for cutting the countertop
• Certificates and instructions

Care and maintenance of polymer marble sinks

• Do not place hot cookware directly from the hob onto the sink – there is a risk of damaging the coating;

• Do not use abrasive cleaners or sharp cleaning tools. 

• Dry the surface with a soft cloth or kitchen paper – this prevents limescale deposits and stains;

Drilling the technological holes for a mixer tap and/or liquid soap dispenser:

• Using a hammer and a punch tool, tap several times on the marked centre;

• Continue tapping from the centre towards the periphery of the hole until it is finally shaped;

• Clean any remaining roughness along the edge with sandpaper or another suitable abrasive tool.

Installation instructions for composite kitchen sinks

• Trace the outline of the template included with the sink onto the kitchen countertop;

• Cut the countertop from the inside of the traced outline – so that the line remains visible after cutting;

• If necessary, drill the hole(s) for the mixer tap and/or liquid soap dispenser, following the instructions below;

• Clean the contact surfaces – those of the countertop and of the sink – with alcohol, and apply a thin layer of transparent silicone;

• Place the sink into the opening and press it lightly against the countertop, using some weight;

• Remove the silicone that oozes out along the edges and clean off the residue;

• After the silicone has fully dried, remove the weight – the sink is ready for use

 

 

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare