VITO ECO WHITE BW 2.940 L.

Eco-friendly paint for general interior use. It spreads very well. Forms a smooth, matt surface. Has high opacity and low consumption. The paint is almost odourless, as it does not contain hazardous substances such as aromatic hydrocarbons, ammonia, free formaldehyde, heavy metals or alkylphenol ethoxylates. The product is certified by the Higher Council for Awarding the Ecolabel (ASAOS - Greece), in accordance with the criteria of the EU Ecolabel Board.

• Eco-friendly paint
• High opacity and low consumption.
• Surface drying time 15-30 min
• Dilution with water 5-10%
• Consumption 11-13m2/lt
• Apply with brush, roller, spray gun

Instructions for use

SURFACE PREPARATION
Surfaces must be clean, dry and smooth, free of dust, grease or friable materials.
To fill holes and fill cracks, use acrylic building filler.
Old surfaces covered with lean paints (with lime or adhesive paints) must be primed.
New surfaces of plaster, concrete, brick, plasterboard and others, as well as filled surfaces, must be primed.

When using dark shades, surfaces must first be primed either unchanged or lightly tinted to the shade of the desired final colour.

APPLICATION
Before use, the product must be stirred thoroughly. Apply in two coats with a brush, roller or spray gun, diluting up to 10% with water. The product should not be applied at temperatures below 5°C, above 35°C and/or at relative humidity above 80%.

The applied layer is dry to the touch in 15-30 minutes. The next coat is applied after 3-4 hours. The given times vary depending on atmospheric conditions (relative humidity and temperature).
Surfaces painted with Vito Eco can be washed with water at the earliest three weeks after painting, using a soft sponge, and in case of stubborn stains using a neutral, colourless detergent. Tools are cleaned immediately after use with water and, if necessary, washed with soap or detergent.