WATER POLISH 2513 750 ML. DARK WALNUT

Water-based wood varnish with protective and decorative function, produced on a polyurethane base, for interior and exterior surfaces. Thanks to its special composition, it effectively prevents the growth of mould and mildew on the
protective film formed by it. Impregnates the wood, forming a thin protective film while allowing it to "breathe". Follows the shrinking of the wood thanks to its elasticity, and protects it from moisture and the effects of UV rays.

• Polyurethane, impregnating, decorative wood varnish
• Protects from moisture and the effects of UV rays
• Surface drying time 2-3h
• Consumption 12-16m2/lt
• Apply with brush, roller, spray gun

SURFACE PREPARATION
Surfaces must be clean and dry, free of resins, grease or residues of old varnish coatings.
New wooden surfaces should be treated with a water-based wood preservative - colourless, or for protection against fungi and insects.

APPLICATION
Before use, the product must be stirred well. Apply in one or two coats with a brush, roller or spray gun, without thinning. Do not apply at temperatures below 5°C, above 35°C and/or at relative humidity above 80%, or when the moisture content of the wood is above 18%.
The applied coat is dry to the touch in 2-3 hours. The next coat can be applied after 24 hours. The given times vary depending on atmospheric conditions (relative humidity and temperature). The final colour depends on the natural colour and absorbency of the wooden surface, as well as the number of water-based coats applied.
Tools should be cleaned immediately after use with water and, if necessary, washed with soap or detergent.